Instruments Post List Test – The Advanced Science Research Center

10X Chromium iX ›
Single cell transcriptomics and multiome capability with featured barcode technology
3D Lithography System ›
The Nanoscribe Photonic Professional 3D Lithography System is an easy-to-operate table-top laser lithography system that enables the fabrication of true three-dimensional nanostructures using commercially available photoresists
3D Optical Profiler ›
The Bruker Contour GT-I is a fully automated and programmable optical interferometric microscope that can be used to measure and map surface features in 3D.
Agilent Seahorse XFe24 Analyzer ›
The cutting-edge Agilent Seahorse XFe24 Analyzer is capable of measuring the oxygen consumption rate (OCR) and extracellular acidification rate (ECAR) of live cells in a multi-well plate to interrogate key cellular functions such as mitochondrial respiration and glycolysis.
Aria Fusion Cell Sorter ›
Four lasers (11 colors) advanced cell sorter with bioprotection
Atomic Force Microscope (AFM) ›
The Bruker Dimension FastScan AFM provides high speed topographic imaging without loss of resolution or force control.
Atomic Layer Deposition (ALD) System ›
The Ultratech Fiji G2 system is a load-locked ALD system capable of both thermal and plasma-enhanced depositions of various dielectric and metallic films
Balance Beam ›
Rodent motor function assessment
Bio-AFM ›
Our novel Bio-AFM setup employs Bruker JPK atomic force and Andor Dragonfly confocal fluorescence systems in tandem to produce powerful analyses of biological samples.
Biomark HD ›
Automated, high-performance PCR system allowing nanoliter reaction volume with exquisite single-cell sensitivity and consistent results
Bioruptor Pico Sonication System ›
All-in-one shearing system for DNA, RNA, and chromatin shearing
Bitplane Imaris ›
Bitplane Imaris is a world’s leading interactive 3/4D image visualization and analysis software. The Full Spectrum package includes two full collections of Imaris image analysis and visualization modules as well as deconvolution software AutoQuant and 3D alignment and reconstruction tool Voloom.
Bruker Autoflex Speed TOF/TOF ›
Features a number of options, including linear mode, high-resolution reflectron mode, LIFT technology to enable the use of various MS/MS techniques and fully automated plate management for label-free high throughput screening.
Bruker AVANCE III HD 600 MHz NMR Spectrometer ›
Equipped with an Oxford Actively Shielded 14.1 Tesla standard bore magnet, 5-mm triple resonance inverse TCI CryoProbe and room temperature solution state probeheads, a PHOENIX 1.6-mm HXY solid-state probe, refrigerated 24-sample SampleCase, and TopSpin 3.5 software.
Bruker AVANCE III HD 700 MHz NMR Spectrometer ›
Equipped with Bruker UltraShield 16.4 Tesla standard bore magnet, 5-mm quadruple resonance inverse QCI-F CryoProbe and room temperature probeheads, refrigerated 5×96-well plates SampleJet, BSNL liquid nitrogen liquefier, and TopSpin 3.5 software.
Bruker AVANCE III HD 800 MHz NMR Spectrometer ›
Equipped with Bruker Ascend UltraShield Plus 18.8 Tesla standard bore magnet, 5-mm triple resonance inverse TCI CryoProbe and room temperatureprobeheads, refrigerated 24-sample SampleCase, BSNL liquid nitrogen liquefier, and TopSpin 3.5 software.
Bruker maXis-II ETD ESI-qTOF ›
Equipped with Dionex Ultimate-3000 LC system; combines latest hardware innovations in TOF technology with unique software packages that deliver sub-ppm mass accuracy and up to 80,000 mass resolution.
Bruker Multimode 8 Atomic Force Microscope ›
The Bruker MultiMode 8 AFM provides nano-meter surface topography imaging and pico-Newtown surface force measurement in both air and liquids.
C1 Single-Cell Autoprep System ›
Automated single-cell preparation for mRNA sequencing, DNA sequencing, epigenetics or miRNA expression.
Coherent Mira Hp-f V18 High Power Titanium: Sapphire Tunable Ultrafast Femtosecond Laser ›
Complex Running Wheel ›
Variation from the standard running wheels to explore behavioral and learning deficits
Curing Ovens ›
Two ultra-stable Blue M Ovens for soft and hard baking of photoresists
DC/RF Sputter Deposition System ›
The AJA Orion Sputtering System is a load-locked sputtering system capable of depositing metal and dielectric films over a substrate up to 6 inches in diameter.
Dicing Saw ›
The Disco DAD3220 is a single spindle dicing saw, capable of handling work-pieces up to a maximum of 6” square or 6” in diameter.
E-beam & Thermal Evaporation System ›
The AJA Orion 8E Evaporator System is capable of both electron beam (e-beam) and thermal evaporation.
Electron Beam Lithography System – 100 KeV ›
The Elionix ELS-G100 is a high speed, ultra high precision thermal field emission electron-beam lithography system.
Electron Beam Lithography System – 50 KeV ›
The 50 KeV Elionix is a high speed lithography system optimized for large area and high speed pattern writing.
Ellipsometer ›
The Woollam V-VASE is a Variable Angle Spectroscopic Ellipsometer capable of automated thin-film characterization, high-precision angle, and a wide spectral range (240 nm to 2500 nm).
Ethovision XT ›
video tracking system for automatically recording animal activity and movement
FEI Helios Nanolab 660 FIB-SEM ›
FEI Tecnai G2 Spirit Twin TEM ›
FEI Titan Halo 80-300 TEM ›
FEI Titan Themis 200 TEM ›
FEI Vitrobot IV ›
Cryo-EM sample preparation
Field Emission Scanning Electron Microscope (FE-SEM) ›
The FEI Nova NanoSEM™ is a high resolution scanning electron microscope intended for sample characterization.
Fischione M1070 NanoClean ›
plasma cleaning and glow discharge
FLS1000 Photoluminescence Spectrometer ›
Furnace Stack ›
The Tystar Mini Tytan Furnace Stack contains two atmospheric pressure that are used to process batches of up to 25 6-inch or 4-inch wafers.
Horiba Scientific Ihr550 Imaging Spectrometer ›
Hotplate Tower ›
The Air Control Microvoid Hot Plate tower is a vented tower that holds several dedicated hotplates for pre and post baking photoresists.
HTX M5 Matrix Sprayer ›
Fine crystal and heated matrix sprayer for MALDI imaging
Inductively Coupled Plasma Etch – Chlorine Based (ICP Cl) ›
The Oxford PlasmaPro System 100 Cobra is a load-locked high plasma density system which can accommodate pieces to wafers up to 6” in diameter.
Inductively Coupled Plasma Etch – Fluorine Based (ICP Fl) ›
The Oxford PlasmaPro System 100 Cobra is a load-locked high plasma density system which can accommodate pieces to wafers up to 6” in diameter.
Inspection Microscopes ›
The system of Nikon Eclipse Inspection Microscopes has a 6”x6” stage and is configured with bright-field, dark-field, and simple polarizing objectives.
J.a. Woollam Ir-vase Ellipsometer ›
Leica Aperio CS2 Slide Scanner ›
Automatic pathology slide scanner
Leica EM ACE600 Coater ›
Au or Pt thin film sputter coating and C thin film thermal evaporation
Leica TCS SP8 STED 3X ›
The TCS SP8 STED 3X, the newest generation of STED (Stimulated Emission Depletion) microscopy by Leica Microsystems, provides super-resolution imaging in all dimensions.
LPCVD Furnace Stack ›
The Tystar Mini Tytan Furnace Stack contains two low pressure tubes that are used to process batches of up to 25 6-inch or 4-inch wafers.
Mask Aligner ›
The EVG620 Mask Aligner is equipped with high-resolution top and/or bottom side microscopes for single or double-side photolithography.
MassARRAY System with Epityper DNA Methylation Analysis ›
A non-fluorescent detection platform utilizing mass spectrometry to accurately measure DNA methylation
Mazes and Foot Shock Chambers ›
Apparatus include the open field arena, elevated plus maze, Porsolt forced swim test cylinder, T-maze, and programmable foot shock chamber
NanoDrop One ›
DNA, RNA, protein quantification with improved accuracy and early contaminant detection
Nkt Photonics Supercontinuum System ›
Organics/Oxides E-beam Evaporator ›
The AJA Organic evaporator is a combination ebeam and thermal evaporator. The ebeam evaporator in the tool is primarily used to evaporate oxides and magnetic materials. The thermal evaporators are used to evaporate low melting point materials, such as organic semiconductors.
Partek Flow ›
Start-to-finish software analysis solution for next generation sequencing data applications
PHI nanoTOF Mass Spectrometer ›
PHI’s patented triple focusing time-of-flight (TRIFT) secondary ion mass spectrometer provides superior sensitivity and the unique ability to image highly topographic surfaces.
PHI Versaprobe II X-ray Photoelectron Spectroscope ›
The core technology of the VersaProbe II is PHI’s patented, monochromatic, micro-focused, scanning x-ray source which provides excellent large area and superior micro-area spectroscopy performance.
PipetMAX ›
Automated liquid handling with qPCR set-up assistance
PippinHT ›
High throughput size selection for next-generation sequencing
Plasma Asher ›
The PVA Tepla IoN 40 is a plasma processing system configured for etch, strip, clean and surface treatment of wafers.
Plasma Enhanced Chemical Vapor Deposition System (PECVD) ›
The Oxford PlasmaPro System 100 PECVD is load-locked tool, capable of depositing silicon oxide, silicon nitride, amorphous silicon, and other films.
Prizmatix Optogenetics Toolkit ›
Stand-alone optogenetics pulser and LED system
Probe Station ›
The probe station is equipped with two Keithley 2400 Source Meters, a Keithley 6485 picoammeter, and a Keithley 2000 Diginal Multimeter.
QuantStudio 7 Flex Real-time qPCR system ›
Quantitative PCR applications with additional dyes, formats, and automation options ***Discounted rate for special reagents, including SYBR Green MasterMix, Taqman MasterMix, cDNA synthesis kits, PCR plates etc.
Qubit 3.0 Fluorometer ›
Sensitive nuclei acid quantification for next-generation sequencing
Rapid Thermal Anneal (RTA) ›
The Allwin21 AccuThermo AW610 is a rapid thermal processing (RTP) system, which uses high intensity visible radiation to heat single wafers for short process periods of time at precisely controlled temperatures.
Reactive Ion Etch (RIE) ›
The Oxford PlasmaPro NPG80 RIE is an open-load medium plasma density system configured for fluorine-based etch chemistries.
RNAscope ›
Cutting-edge in situ hybridization (ISH) technology to visualize, localize and quantify RNA molecular expression
Rotarod ›
Rodent motor function assessment
SCiLS MALDI Imaging Analysis Workstation ›
MALDI imaging analysis software
Spin Coater – E-Beam Resists ›
The Brewer Science Cee Stand-Alone Spin Coater/hotplate is dedicated for the spinning of electron beam resists.
Spin Coater – Photoresist and Other ›
Two additional Brewer Science Cee Spin Coaters are dedicated for photoresist processing and other non-standard materials
Spin Rinse Dryer ›
The spin rinse dryer offers a fast way to clean and dry wafers in patches up to 25 wafers at a time.
Sputter Coater ›
Sputter coating uses ionized argon to vaporize gold atoms from a target and deposit them in a thin layer onto a sample.
Stylus Profiler ›
The Bruker Dektak-XT is a semi-automated stylus profiler that can be used to measure step height with better than 5 Å repeatability, surface roughness, as well as 3D surface mapping.
Tape Mounter ›
The Ultron UH114 mounts wafers to dicing tape and a metal frame to be used with the Disco Dicing Saw.
Tapestation 4200 ›
Gold standard for sample quality control for next-generation sequencing
Thermal Evaporation System ›
The AJA Orion 3-TH Evaporator System is a thermal evaporation system, configured with 3 thermal evaporation sources.
Thermo Scientific Quattro ESEM ›
Environmental scanning electron microscope (ESEM) for the study of materials in their natural state.
Thin Film Analyzer ›
The Filmetrics F20 is used to measure the thickness and optical constants (n and k) of transparent and semi-transparent thin films.
Treadmill ›
Rodent motor function assessment
UV Ozone Cleaner ›
The SAMCO UV-2 is a compact, benchtop, UV-ozone cleaning system that will not damage delicate electronic devices.
Vapor Hydrofluoric Acid Etcher ›
The SPTS Primaxx Vapor HF Etcher is used primarily for isotropic etching of all types of SiO2 and offers a safer alternative to liquid- HF processes.
Wire Bonder ›
The West Bond Wire Bonder is a semi-automatic wire bonder that can accommodate both wedge and ball bonding to interconnect aluminum or gold wire leads to devices.
WITec Confocal Raman Microscope alpha300R ›
Xenon Difluoride Etcher ›
The SPTS Xactix E1 Xenon Difluoride Etcher can be used to isotropically etch Si, Ge, and Mo films.
Zeiss LSM 880 Airyscan Fast Live Cell ›
The Zeiss LSM 880 Airyscan Fast Live Cell is a unique confocal that provides high resolution, sensitivity and speed that enables gentle live cell imaging with super resolution.
Zeiss LSM 880 NLO Two Photon ›
The state of the art Zeiss LSM 880 NLO upright two photon confocal microscope is equipped with tunable Spectra Physics Mai Tai HP DeepSee laser (690-1040 nm) in addition to 6 visible spectrum laser lines (405, 458, 488, 514, 561, 633nm).